 |
|
อุปกรณ์ครอบระบบแห้ง
1.Set U-Clamp according to a distance of the rafter with a screw under a purlin
which rests on the rafters of a roof as to prepare for a C-Line frame. By fixing
a U-Clamp in a center of a roof in a same position.
2.Set a C-Line frame on the U-Clamp along the length of the roof by setting
C-Line in a center position of the roof. By this step, a C-Line frame must be
carefully set equally along the length of the roof and fix both direction by screws
3. Prepare to install Orotex by cleaning all related surface on the roof. The surface
should be clean form dust, oil or any others dirty . Install the Orotex by placing an
Orotex Silicone onto the center track of the roof or rafter. Fixing the Orotex
Silicone onto any necessary surface. In case of joining area, it is recommended
to put the Orotex at lease 3-5 cm.
4. After install the Orotex Silicone, finish the project by fixing the roof with
screws along the length of the C-Line on the roof.
|
|
|
|
สถิติ
|
|
| เปิดเว็บไซต์ |
09/02/2009 |
| ปรับปรุง |
04/07/2024 |
| สถิติผู้เข้าชม | 661,530 |
| Page Views | 731,586 |
|
|
|
![]() |
| «
| July 2024 | »
|
|---|
| S | M | T | W | T | F | S |
|---|
| | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 10 | 11 | 12 | 13 | | 14 | 15 | 16 | 17 | 18 | 19 | 20 | | 21 | 22 | 23 | 24 | 25 | 26 | 27 | | 28 | 29 | 30 | 31 | | | |
|
|
หน้าแรก
รวมรูปภาพ
บทความ
เว็บบอร์ด
ติดต่อเรา
