http://www.totalfoil.com
สร้างเว็บไซต์Engine by iGetWeb.com 
 หน้าแรก  รวมรูปภาพ  บทความ  เว็บบอร์ด  ติดต่อเรา
ค้นหา  ประเภทการค้นหา   
Menu
หน้าแรก
บทความ
เว็บบอร์ด
รวมรูปภาพ
ติดต่อเรา
น้ำยารองพื้น กันรั่วซึม
อุปกรณ์ครอบระบบแห้ง
แผ่นปิดรอยต่อ
กาวเส้น
ซิลิโคน
อุปกรณ์ยึดครอบผนัง
แผ่นฟอยล์กันความร้อน
แปเหล็กสำเร็จรูป




 

อุปกรณ์กันรั่วกันซึม

 

 

1.Set U-Clamp according to a distance of the rafter with a screw under a purlin
which rests on the rafters of a roof as to prepare for a C-Line frame. By fixing

 

a U-Clamp in a center of a roof in a same position. 
2.Set a C-Line frame on the U-Clamp along the length of the roof by setting
C-Line in a center position of the roof. By this step, a C-Line frame must be
carefully set equally along the length of the roof and fix both direction by screws 
3. Prepare to install Orotex by cleaning all related surface on the roof. The surface
should be clean form dust, oil or any others dirty . Install the Orotex by placing an
Orotex Silicone onto the center track of the roof or rafter. Fixing the Orotex
Silicone onto any necessary surface. In case of joining area, it is recommended
to put the Orotex at lease 3-5 cm. 
4. After install the Orotex Silicone, finish the project by fixing the roof with
screws along the length of the C-Line on the roof.


วิธีการติดตั้งอุปกรณ์ครอบระบบแห้งโอโรเทกซ์

 

1.ตั้งขาเหล็กตัวยู U-Clamp ตามระยะจันทันหรือสันตะเข้โดยยึดด้วย ตะปูเกลียวปลายสว่าน ใต้แปหลังคา เพื่อใช้รับเหล็ก C-line โดยให้เหล็กตัวยู อยู่ในแนวกึ่งกลางสันหลังคาหรือสันตะเข้และอยู่ในระดับความสูงเดียวกันตลาดแนว

2.นำเหล็ก C-Line มาวางพาดบนขาเหล็กตัวยู ตลอดความยาวสันหลังคาหรือสันตะเข้  ยึดด้วยตะปูเกลียวทั้งสองด้านโดยให้เหล็กรับครอบ C-Line อยู่ในแนวกึ่งกลางสันหลังคาหรือสันตะเข้ โดยปรับระดับให้หลัง C-Line เสมอกันตลอดแนวกรณีการต่อเหล็ก C-Line ให้ต่อระหว่างช่วงขาเหล็กตัวยู

3.ให้ทำความสะอาดพื้นกระเบื้องก่อนติดแผ่นปิดกันรั่วซึม Orotex โดยพื้นผิววัสดุนำแผ่นปิดกันรั่วซึม Orotexไปติดตามแนวสันหลังคาหรือสันตะเข้ที่ติดตั้งโครงต้องแห้งไม่มีฝุ่นและคราบมันหรือเศษวัสดุอื่นๆลอกแผ่นด้านเคลือบซิลิโคนออกแล้วเหล็กรับครอบC-Line แล้ว กดรีดแผ่นปิดกันรั่วซึม Orotex ให้แน่นทุกด้านกรณีการต่อแผ่นปิดกันรั่วซึม Orotexให้ระยะช้อนทับกัน 3-5 ซม.

4.ใช้ตะปูเกลียวยึดครอบกระเบื้องตามสันหลังคาหรือสันตะเข้กับตัวโครงรับครอบ C-Line โดยใช้ตะปูเกลียวปลายสว่านเจาะผ่านครอบและแผ่นปิดกันรั่วซึม Orotex ให้แน่นทุกแผ่น

 

 

 
สถิติ
เปิดเว็บไซต์ 09/02/2009
ปรับปรุง 18/08/2017
สถิติผู้เข้าชม645,677
Page Views714,016
« March 2024»
SMTWTFS
     12
3456789
10111213141516
17181920212223
24252627282930
31      
หน้าแรก รวมรูปภาพ บทความ เว็บบอร์ด
view